Hitec's best servo just got better. Based on the powerhouse HS-5955TG servo the HS-7955TG has the added benefit of our G2 second generation programmable digital circuit. This new circuit has twice the resolution of our original circuit while adding programmable overload protection. The HS-7955TG has been designed for the most demanding hobby applications including the largest aircraft and monster trucks. Featuring a titanic 333oz./in. of torque at 6.0 volts, all this power is harnessed by incorporating the industries first Titanium gears for incredible wear resistance and two strong hardened steel gear pins and axial brass bushing in the servo case.

Content
HS-7955TG High Torque Titanium Gear Coreless Digital Servo with
12" twisted servo connector and 1.3"(33mm) half horn, heavy duty (HD-LS) pre-mounted
Horns (5 type):
 -1.77" (45mm) diameter round horn, heavy duty (HD-O)
 -2.83" (72mm) long horn, heavy duty (HD-IL)
 -2.32" (59mm) long horn, heavy duty (HD-IS)
 -1.56" (39.5mm) half horn, heavy duty (HD-LL)
 -1.05" (26.6mm) metal half horn, blue
Servo mounting hardware
Hitec Decal
General Servo Information

Detailed Specifications  
Motor Type: Coreless
Bearing Type: Dual Ball Bearing
Speed: 0.19 / 0.15 sec @ 60 deg. (4.8v/6v)
Torque: 250 / 333 oz.in  or 18 / 24 kg.cm (4.8v/6v)
Size: 1.57" x 0.78" x 1.45" / 40.00 x 20.00 x 37.00mm
Weight: 2.29oz / 65.00g

Overload Protection: This function is to protect the servo from overload condition, Once the servo is force to overload condition for certain time, the motor out put will decreased to user setting level, please note this setting is deactivated (OFF) by factory setting.

Resolution modes setting: There are two resolution modes (High and Normal) in HS7xxx servo setting, factory default is set at "HIGH" resolution, and servo travel will be 120 degree, If the user need to widen the servo travel, user may sellect the "Normal" resolution, so the servo  will be travel into 180 degree by using the HFP-20 servo programmer to funtion the setting.